Easy Ways to Restore Worn Outdoor Furniture and Decor
April 11, 2024
Share this
Tips on restoring and updating weathered outdoor furniture and decor.
Patio furniture and decor can be really expensive, so I'm always looking for ways to update or restore them and bring back some of the original finish.
The elements do a number on everything outside -- from fading in the sunlight to yucky grime from the elements, there are many simple ways to make them look (closer to) new again!
We're hosting a special event on our back patio in a few weeks, so we've been working on getting everything set up for the season. I've also been tackling some small projects out there to get things in ready for the party.
I had a list of drab looking outdoor items I wanted to clean and update. The first project was revitalizing our weathered cedar potting bench.
My Dad helped me build this DIY potting bench ten years ago and I absolutely cherish it! I'm thankful we spent more on cedar when we built it -- other than refinishing it a couple times now, it's held up beautifully.
Years ago I sanded and treated the cedar and it looked amazing!:
But after six years of direct sun and the elements, the cedar started to gray again. This is normal for this type of wood, especially when it's exposed like it was.
Last time I refinished this potting bench it was in much worse shape -- I had to sand like crazy to get all of the mildew off. This time I tried something new and I was shocked at how well it worked:
This post may contain affiliate links for your convenience.
See my policies and disclosure page for more information.
You can see how much cleaner the left side is after this easy treatment. (The gray all the way over on the right is how it looked before.)
All I did was add a few scoops of Oxiclean powder (and water) to a spray bottle and then sprayed it onto the wood. I let it sit for a few minutes and then used the hose to reveal the pretty wood finish:
It was like magic! And sooooo easy!
You can also use a mixture of bleach and water if you don't have Oxiclean.
I could have stopped there, but I wanted to remove just a bit more of the rough texture, so I did a quick sanding with my orbit sander to get any remaining residue off of the cedar.
After it dried completely, I removed dust from the sanding with a blower and then applied another coat of the Helmsan Spar Urethane I used years ago:
It brings out the gorgeous color of the wood and gives it just a bit of shine as well.
The bench looks SO MUCH BETTER! This is it on a rainy day, but you can tell the gray is gone:
I use it for both planting and for entertaining, so it's important that it's cleaned up and looking good. :)
Next up, our outdoor fountain desperately needed to be cleaned up. I got it a couple years ago and we LOVE it...the sound is so relaxing. But our hard water has done a number on it:
I don't eve know what that grime was at the bottom, but it was not easy to clean!
I sprayed a cleaning solution and used a stiff wire brush to remove it:
I was going to use the hard water stain remover that I shared last week to clean this up, but the whole fountain was a MESS.
Parts of the finish had chipped off as well:
Those parts were beyond fixing, so I decided to try covering it all in spray paint instead.
I've never used spray paint on something that holds water, but I have sprayed outdoor items and planters that get exposed to sun and rain, and they're still looking good years later.
I used the wire brush to scrape the brittle finish and then lightly sanded it all down. After it was clean and dry, I started spraying numerous light coats of black spray paint:
Wow, what a difference!! The spray paint gave it a whole new look.
I used the same black spray paint I used to transform our kitchen cabinet hardware.
Before I filled it up again, I added a coat of this Krylon glitter blast sealer on the parts that would come in contact with the water. It was the only clear finish spray I had and I figured if it keeps bits of glitter from shedding everywhere, it would help to seal this as well.
It looks brand new again! Totally worth the time I spent cleaning it up and painting:
It's been a week and a half and it still looks like it did the day I painted it. I've already had to clean the hard water marks off once and the paint didn't budge.
I can't even believe how much better it looks now!:
 |
| Look at my gorgeous peonies about to pop! |
So far so good...I will update over time to let you know how it's holding up. These outdoor fountains are not cheap, so if this extends it for another year or two I'll be thrilled!
We have a lot of wicker furniture outside, and a couple chairs we've had forever were scratched up:
These are lightweight and sometimes get tipped over in high winds.
Otherwise they're in great shape, so I had an idea to cover up those lighter spots a bit. I grabbed the stain pen I use to touch up our wood floors and furniture and covered the worn spots:
I let it sit for a few minutes and then lightly wiped up any excess. After it was dry I brushed a light coating of the Helmsman urethane on those areas as well.
They look soooo much better now! It only took a few minutes to do both chairs and the difference is noticeable:
Even if it lasts for a few months this was definitely worth my time! We moved these closer to the house, so hopefully they won't get caught in the wind anymore.
It was raining today and you can see that the stain is holding up and the water is beading where I used the urethane:
My last project involved a product I picked up last year and hadn't tried yet. A lot of our outdoor items were looking worn and this solution is supposed to bring them back to life.
Here's a view of our large storage bench -- you can see how the plastic had lightened up and was discolored from the sun:
The product I used was Rejuvenate Outdoor Restorer -- it can be used on plastic, metal...all kinds of things:
I cleaned the storage bench (those little grooves were impossible to get really well) and after it was dry I applied a coat of the solution with a clean rag.
It didn't make it look brand new, but it DID help a lot!:
I was pretty impressed!
The rattan and metal furniture on our covered patio have some rusted areas on the metal that need to be cleaned up and spray painted, but for now I figured I'd try this product:
I wiped it down with a wet rag and then applied a quick coat of the Rejuvenate.
The photos don't show the difference I saw in real life. It deepens the finish and makes it look much better:
The rusty bits aren't as noticeable now either -- the richer metal tone helps to hide them.
I was impressed with this stuff! I'll definitely be trying it on more outdoor items. I bet it would bring plastic planters and metal lighting back to life.
To keep our patio fabrics looking good year to year, I use our little power washer to clean the rugs every season. I throw the outdoor pillows and cushion covers in the wash a couple times over the spring and summer.
This year I gave all of our outdoor fabrics a coat of this sun and water shield spray to protect them from moisture and fading from sunlight.
I'll update and share how well that works later this summer!
All of these items look a million times better after these updates. If I can extend the life of any of them it is definitely worth the time!
Have you tried any of these ways of updating or restoring your outdoor decor?
I'll be sharing a new tour of our back patio with you soon! :)
Never miss a post by signing up to get posts via email.
What is a good product to use on outdoor rattan wicker furniture to protect it from the elements?
ReplyDeleteI have the same fountain. The finish on mine also started chipping off. I used a wire brush and spray paint to refinish it. It got me through one more summer, but this year I cut my losses and turned it into a planter.
ReplyDeleteI have vinyl wicker that has lasted for about 20 years. It’s finally starting to crack and break now so it will need to be replaced. Too bad I didn’t have any of that Rejuvenate stuff to keep it going for eternity! Lol
ReplyDeleteVery helpful post, thank you! What material is your fountain made of?
ReplyDeleteI’m trying to install a board and batten wall like you did in your primary bedroom. I only have 8 foot ceilings.
ReplyDelete-Can you tell me your ceiling height?
-How many inches is your top section ( the one above the headboard?)
-How wide are your vertical strips? I’m guessing 2 inches? Or 2 1/2 inches?
Your wall came out great.
Thanks! Our ceiling is nine feet on those walls. I think the tongue and groove pieces are about five inches wide. :)
Delete