DIY bookcases by the fireplace
April 24, 2018
Share this
Sooooo remember when we first moved in and I was totally in love with the
simplicity of the new house? I didn't want to add too many tchotchkes and
really enjoyed the quiet in the house after a few months of craziness.
I was SO sure I didn't want to add built ins to the sides of the fireplace.
Even though they called out for it because of the design of the fireplace, I
thought for sure I just wanted furniture. I found these consoles for a great
price and
shared them with you here:
I didn't have anything hung just yet and I ended up just adding some books to
the top till I figured out exactly how I wanted to decorate them.
But the longer we're in the house, the more I want to cozy it up -- I so
enjoyed that simplicity for a few months, but now I feel the desire to make it
feel more like us. And if you know me...you know my heart belongs to built
ins. ;) I've mentioned over the past few months that my mind was changing. And
I'm so glad it did!
I drew up a very simple design and kept in mind on the one side of the
fireplace we'd need to house our electronics and sound system stuff like a
subwoofer (it's been sitting out all this time). I started on the easier side
for now, and now that I've got it down I'll start the other one. But I had to
share it with you!
I LOVE building things like this. It's so satisfying and I find it fun. It's
like a big puzzle. But I don't use any fancy tools or materials to do it -- so
YES, you can do this too!
This kind of spot is perfect because I have plenty of walls to work with for
support. Building a piece in a space like this is easier. I started by
screwing the side pieces to the bottom shelf from underneath. Then we placed
it directly on top of the baseboards. No need to remove them!:
The baseboards gave me enough support to get started. I secured the sides into
studs in the wall:
My next step was to add supports for the middle shelf -- I just used some
scrap wood from my
chunky DIY door trim
from the old house. Make sure they're at exactly the same height on both
sides:
These are the screws I use for projects like this -- they say drywall but are
are also suitable for wood projects:
They grab into the wood and screw in SO easily. I use the 1 5/8 length for
connecting pieces together and a two inch screw for securing the sides and
supports into studs.
I also like that they sink into the wood easily, so I can fill the holes and
you won't even know they were there. I share this because you don't need any
special jigs or tools to build! You just need strategically placed screws.
;)
I added the middle shelf next:
I secured that with screws into the supports on the sides, and then added a
1x2 support across the back underneath the shelf as well. I screwed that into
studs along the wall. By the way, there's no need to add a wood back when you
have caulk and paint. It will look like one big piece by the time I'm done.
Because the shelves are long, and I wanted a little more detail, I added
middle supports for each one, and then added the top:
I secured each support piece from the top with screws. Additional support is
provided with the trim work I added to the front, which I'll show you in
minute.
You can see I also added supports underneath the whole built in on the floor
-- they're just scraps I cut to size and secured with screws.
It's amazing how much of a difference the trim makes! I used 1x2's in select
pine (clean pine without knots) to finish off the front of the bookcase:
I still have to add quarter round to the base, as well as caulk like crazy.
I've said it a million times -- caulk makes almost any project look
professional! All the imperfections disappear with that stuff. Don't worry
about it looking perfect!
I'm going to add a support to the top shelf like I did the bottom. You can't
even see it on the bottom shelf from this view, and when it's all painted out
you won't see either of them:
Here are a few other details if you'd like to try this project:
- The lovely folks at Lowe's cut all of the wood down for me -- I had my exact measurements for them.
- I used two 4x8 birch boards and one smaller 2x4 board for the whole project. Total cost was around $160 for all the materials (boards and trim) and I have some scrap leftover. If I had our builder do these it would have been nearly ten times that much.
- You'll need a stud finder to make sure you attach to studs and I recommend a corded screwdriver -- the more power the better.
- This took me about three hours to complete, but I've done this a few times. ;) Overall you'll probably spend more time caulking and painting than building!
I'm off to get the materials for the other side! Now that I finished this one up I'm super excited to get them both done. The other side has a couple additional cut outs but shouldn't be too bad.
Now the question we're going back and forth on...what color to paint them? I'm not going to stain, so that's not an option:
We're considering three options -- paint them the same color of
the fireplace walls
(that we LOVE). Paint them white to tie in the fireplace surround, or paint
them white and paint the back wall the dark color to tie in the fireplace
walls. I'm leaning towards painting them the dark color, but you can never go
wrong with white!
I may prime them and see what we think before deciding. That will give us an
idea of how they'll look.
Here's an early before and an after for you (it looked better than this later
on!):
And the after! (An in between after, but still pretty to me!) We LOVE it!!:
What's funny is this looks simpler to me than the furniture did! I'm going to
keep the decor very clean on both sides. (We're keeping one of the
consoles for the basement and selling the other one.)
You can see a few of my favorite built in projects by clicking on the link
under these photos:
To shop items in our home, click here!
Never miss a post by signing up to get posts via email.
Amazing DIY, love the light-coloured wood! It looks exactly like what I'd buy in a store! 🙂
ReplyDeleteCharmaine Ng | Architecture & Lifestyle Blog
http://charmainenyw.com
Do you have a link to your fireplace/mantel area? The sneak peek has me intrigued! Love following your progress. Love your progress and choices!
ReplyDeleteYep I link to it towards the end of the post. Thank you!!
DeleteSo glad you're back! I don't know who that person was that wrote about no built-ins and getting all minimalist! In all honesty, I thought I'd see either floor to ceiling (lol) or mantle high built-ins. Welcome back! :)
ReplyDeleteHaha!! I think my mind needed a bit of a break. But I’m back! 😂
DeleteLooks great. My preference would be white all the way. Just with the lighter wood you can see how much brighter that corner is, versus the dark console. But, I know whatever you choose it will be amazing.
ReplyDeleteI would be helpful if you gave more description when using the term "board." When I read board I think lumber, not plywood or MDF. I love your projects.
ReplyDeleteThank you! I stated in the post that it’s 3/4 thick 4x8 birch wood. :) It’s not MDF.
DeleteLove it! One more option to add...paint them gray but lighter for contrast. Not sure what color your wall is there but thinking along the lines of Dorian gray. This looks awesome!
ReplyDeleteso fun and looks simply, ha! i can see only one outlet, will you drill a hole on the board if you need an outlet on the other shelves? is it possible to put doors down the road if you want to hide the stuff?? thanks!
ReplyDeleteBeautiful! So glad you went with built-ins...so much better and so professional!! GREAT job.
ReplyDeleteI think white would look great! It already looks much brighter with the light wood than the darker consoles. Another job well done!
ReplyDelete...well done! I'm liking white bookshelves with a stained top to match the wood of the mirror...kinda of like what you did with the entry bookcase at the old house!
ReplyDeleteVery nice build, great work, Sarah!These bookcases really look amazing!
ReplyDeleteAs always...looks amazing! My vote is to paint it with the fireplace wall color... but whatever you do I will love!
ReplyDeleteSo glad you decided to do built ins! I think it really finishes off the room and has a more custom look. I'd probably paint it white so that the gray wall really stands out as a feature wall.
ReplyDeleteLOVE IT! It is really nice. I think I may use this idea to built in my pantry. It looks so custom. Thank you for sharing.
ReplyDeleteLove the built in look. I love the color of the fireplace wall too, I'd try that on the bookcase.
ReplyDeleteAnother vote for white so your fireplace accent wall stands out.
ReplyDeleteLooks great and yes, much simpler than the consoles that never did look quite right. I'm torn about what color I would paint also, but since I can't really see how the light is in your room, I'm not going to offer an opinion. I'm sure whatever you do will be amazing.
ReplyDeleteWhite without a doubt! Love your blog!!
ReplyDeleteYou never cease to amaze me! You make this look so easy....but I'm not sure I have your carpentry skills which is a huge shame!!
ReplyDeleteThat looks amazing. I agree that it will be so much more clean than the cabinets you had before. It will just be seamless without any interruption for the eye to get stuck on. I'm inclined towards white paint to go with the trim. Though, in your old house you had the charcoal fireplace and the cabinets in the same color, and it looked great. I think because the cabinets were taller, it made sense for them to read as one unit with the fireplace. Not sure it would work as well with the lower shelves you've built for this house. But whatever you do, I'm sure I will love it!
ReplyDeleteWas not at all shocked by this development! Those little furniture pieces were never going to fly for you long term!
ReplyDeleteYou could do it like you did your library wall. Or just do all in white for a nice crisp look. Your accessories will stand out. You always do a nice job with that!!
ReplyDeleteOooh I would do white like fireplace and then the dark walls. I think it will make it appear as one ha-uge wall unit! Its beautiful. I dont know if I have enough confidence to build like you. But I DO enjoy watching what you do!!
ReplyDeleteI may have missed this...but where did you find the round mirror above the built ins? (pssst -- dark grey for the win)
ReplyDeleteGot them at Homegoods! :)
DeleteWow! what an amazing transformation. You are very talented. Your post came at the perfect time for me since we are designing our house and I don't want full built in. Thanks for your inspiration. Jackie
ReplyDeleteYour shelves look great...even before paint. Thank you for the inspiration! Can’t wait to see what color you paint them and how you style them. I know they’ll be beautiful! I almost have my DH convinced to build these shelves to flank our fireplace. The space beside the fireplace on each side is 56 inches. Do you think this is too wide? Will the support piece be enough to support the shelves so they don’t sag? Any advice you could offer will be much appreciated.
ReplyDeleteNope — ours is much wider, so you’ll be fine! :)
Delete